HYBRID BATTERY SYSTEM > FREEZE FRAME DATA

for Preparation Click here

HINT:

The power management control ECU (HV CPU) records vehicle and driving condition information as freeze frame data the moment a DTC is stored. It can be used for estimating or duplicating the vehicle conditions that were present when the malfunction occurred. To confirm the details of the hybrid control system, check the detailed information for the DTC information code in the Data List (INF code).

1. Connect the intelligent tester to the DLC3.
   

2. Turn the power switch on (IG).
   

3. Turn the intelligent tester on.
   

4. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
   

5. Select a DTC in order to display its freeze frame data.
   

6. Check the freeze frame information recorded with the DTC.
   

   HINT:

   For the freeze frame data chart, Click here.