CRUISE CONTROL SYSTEM > PRECAUTION

for Preparation Click here

NOTICE:

When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected:

1. Turn the cruise control main switch (ON-OFF button) off when not using the cruise control system.
   

2. Be careful as the vehicle speed increases when driving downhill with the cruise control system on.
   

3. The +RES operation changes according to the cruise control system status. When the cruise control system is operating, the + function operates. When the cruise control system is not operating, the RES function operates.
   

4. If the cruise main indicator light blinks while the cruise control system is operating, turn the cruise control main switch (ON-OFF button) off to reset the cruise control system. After the reset, if the cruise control main switch (ON-OFF button) cannot be turned on, or the cruise control system is canceled immediately after turning the cruise control main switch (ON-OFF button) on, the system may have a malfunction.
   

5. Do not use the cruise control system where the road conditions are as follows:
   

   1. Heavy traffic
      
   2. Steep decline
      
   3. Roads with sharp turns
      
   4. Icy or snowy roads
      
   5. Slippery roads
      

6. Do not use the cruise control system while towing.