Home

Toyota Workshop

GSIC - Global Service Information Center

MICROPHONE (w/ Sliding Roof) > REMOVAL

for Preparation Click here



1. REMOVE ROOF TOP MOULDING


    B227832

  1. Using moulding remover B, disengage the 3 claws and 2 clips, and remove the roof top moulding.



2. REMOVE MAP LIGHT ASSEMBLY


    E189671

  1. Disengage the 4 clips and 2 guides as shown in the illustration.

  1. Disconnect the connector and remove the map light assembly.



3. REMOVE THEFT WARNING RADAR SENSOR (w/ Theft Deterrent System)


    B229305

  1. Disconnect the connector.

  1. Disengage the clamp.

  1. Remove the 3 screws and theft warning radar sensor.



4. REMOVE TELEPHONE MICROPHONE ASSEMBLY


    E189431

  1. Remove the 8 screws and map light cover.



    E189432

  1. Disconnect the connector.

  1. Disengage the 2 claws and remove the telephone microphone assembly.