Home

Toyota Workshop

GSIC - Global Service Information Center

NAVIGATION RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL NAVIGATION RECEIVER ASSEMBLY


2. INSTALL NO. 2 RADIO BRACKET


    E188501

  1. Install the No. 2 radio bracket with the 4 screws.



3. INSTALL NO. 1 RADIO BRACKET

HINT:
Use the same procedure for the No. 2 radio bracket.



4. INSTALL NAVIGATION RECEIVER WITH BRACKET


    E188508

  1. Engage the 4 claws to temporarily install the navigation receiver assembly with bracket as shown in the illustration.



    E188505

  1. Install the navigation receiver assembly with bracket with the 4 bolts.



5. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    B223459

  1. Connect the connector.

  1. Engage the 3 claws to install the upper instrument panel finish panel sub-assembly.



6. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. Connect the connector.



  1. Engage the 14 claws to install the instrument cluster finish panel garnish.


    B223458



7. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B223456

  1. Engage the 7 claws and 2 clips to install the lower center instrument cluster finish panel sub-assembly.



8. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    B223453

  1. Connect each connector.

  1. Engage the 6 claws to install the integration control and panel assembly.



9. INSERT MAP DISC (w/ Navigation System for DVD)