Home

Toyota Workshop

GSIC - Global Service Information Center

WIRELESS DOOR LOCK CONTROL SYSTEM > PRECAUTION

for Preparation Click here



1.PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following systems after the terminal is reconnected.

System Name
See Procedure
Intelligent Parking Assist System
 Click here


2.PRECAUTION WHEN USING INTELLIGENT TESTER

  1. When using the intelligent tester to troubleshoot the wireless door lock control system:
    Connect the intelligent tester to the DLC3 while the power switch is off, and turn a door courtesy light switch on and off at 1.5-second intervals until communication between the intelligent tester and vehicle begins.