Home

Toyota Workshop

GSIC - Global Service Information Center

NAVIGATION SYSTEM (for HDD) > CD Sound Skips

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CD


    I100152

  1. Check that the CD is not deformed or cracked.

    OK:
    No deformation or cracks on the CD



NG
CD IS FAULTY
OK


2.CHECK CD


    I100201E04

  1. Check the CD.

    OK:
    The CD is clean.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.

    HINT:
    If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.



NG
CLEAN CD
OK


3.CHECK OPERATION WITH ANOTHER CD

  1. Check using another CD.

    1. Check if the problem recurs using another CD.

      OK:
      The problem does not occur.



NG
Go to step 4
OK

CD WAS FAULTY 

4.CHECK NAVIGATION RECEIVER ASSEMBLY

  1. Check the navigation receiver assembly installation condition.

    1. Check that the navigation receiver assembly is properly installed.

      OK:
      The navigation receiver assembly is properly installed.



NG
REINSTALL NAVIGATION RECEIVER ASSEMBLY PROPERLY
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)