Home

Toyota Workshop

GSIC - Global Service Information Center

FRONT SEAT OUTER BELT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY


B203747E01

NOTICE:
Do not disassemble the retractor.

  1. Before installing the front seat outer belt assembly, check the ELR.

    1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.
      If the result is not as specified, replace the front seat outer belt assembly.