MOTOR CABLE > INSTALLATION

1. INSTALL MOTOR CABLE

2. INSTALL INVERTER TRAY BRACKET

3. INSTALL INVERTER RESERVE TANK ASSEMBLY

4. INSTALL INVERTER WITH CONVERTER ASSEMBLY

5. CONNECT WATER HOSE

6. CONNECT NO. 2 ENGINE ROOM WIRE

7. REMOVE INVERTER TERMINAL COVER

8. CONNECT NO. 2 ENGINE WIRE

9. CONNECT HIGH VOLTAGE CABLE OF FRONT TRANSAXLE

10. CONNECT FRAME WIRE

11. CHECK HIGH VOLTAGE CABLE CONNECTION

12. INSTALL INVERTER TERMINAL COVER

13. INSTALL ENGINE ROOM MAIN WIRE

14. INSTALL NO. 1 INVERTER BRACKET

15. INSTALL SERVICE PLUG GRIP

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

17. INSTALL REAR NO. 3 FLOOR BOARD

18. INSTALL REAR DECK FLOOR BOX

19. INSTALL REAR NO. 2 FLOOR BOARD

20. ADD COOLANT (for Inverter)

21. INSPECT FOR COOLANT LEAK (for Inverter)

22. INSTALL NO. 1 ENGINE UNDER COVER

23. INSTALL ENGINE UNDER COVER

24. INSTALL FRONT SPOILER COVER (w/ Front Spoiler)

25. INSTALL RADIATOR SUPPORT OPENING COVER