CENTER AIRBAG SENSOR ASSEMBLY > INSTALLATION

1. INSTALL CENTER AIRBAG SENSOR ASSEMBLY

2. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

3. INSTALL CONSOLE BOX ASSEMBLY

4. INSTALL BOX BOTTOM MAT

5. INSTALL FRONT NO. 2 CONSOLE BOX INSERT

6. INSTALL FRONT NO. 1 CONSOLE BOX INSERT

7. INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET

8. INSTALL ELECTRICAL KEY OSCILLATOR

9. INSTALL SHIFT LOCK CONTROL UNIT ASSEMBLY

10. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

11. INSTALL GLOVE COMPARTMENT DOOR

12. INSTALL NO. 2 INSTRUMENT PANEL REGISTER

13. INSTALL NO. 1 SIDE DEFROSTER NOZZLE

14. INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)

15. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Radio Receiver)

16. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

17. INSTALL NAVIGATION RECEIVER WITH BRACKET (for Navigation Receiver Type)

18. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

19. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH

20. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

21. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

22. INSTALL REAR CONSOLE BOX ASSEMBLY

23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

24. INSTALL REAR NO. 3 FLOOR BOARD

25. INSTALL REAR DECK FLOOR BOX

26. INSTALL REAR NO. 2 FLOOR BOARD

27. PERFORM DIAGNOSTIC SYSTEM CHECK

28. INSPECT SRS WARNING LIGHT