BRAKE BOOSTER (for LHD) > INSTALLATION

1. INSTALL BRAKE BOOSTER GASKET

2. INSTALL BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY

3. INSTALL NO. 5 BRAKE ACTUATOR BRACKET

4. CONNECT BRAKE ACTUATOR HOSE

5. CONNECT NO. 1 RESERVOIR HOSE

6. CONNECT NO. 2 RESERVOIR HOSE

7. INSTALL BRAKE MASTER CYLINDER RESERVOIR WITH BRACKET

8. INSTALL PUSH ROD PIN

9. INSTALL BRAKE PEDAL RETURN SPRING

10. FILL RESERVOIR WITH BRAKE FLUID

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

12. BLEED BRAKE SYSTEM

13. INSPECT AND ADJUST BRAKE PEDAL

14. PERFORM EMERGENCY BRAKE SIGNAL LEARNING (w/ Emergency Brake Signal)

15. OBTAIN ZERO POINT OF YAW RATE AND ACCELERATION SENSOR

16. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY

17. INSTALL COWL BODY MOUNTING REINFORCEMENT LH

18. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

19. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

20. INSTALL REAR NO. 3 FLOOR BOARD

21. INSTALL REAR DECK FLOOR BOX

22. INSTALL REAR NO. 2 FLOOR BOARD