CAMSHAFT > INSTALLATION

1. INSTALL NO. 1 CAMSHAFT BEARING

2. INSTALL NO. 2 CAMSHAFT BEARING

3. INSTALL NO. 2 CAMSHAFT

4. INSTALL CAMSHAFT

5. INSTALL BEARING CAP

6. INSTALL CAMSHAFT HOUSING SUB-ASSEMBLY

7. INSTALL CAMSHAFT TIMING SPROCKET

8. INSTALL CAMSHAFT TIMING GEAR ASSEMBLY

9. INSTALL NO. 1 CHAIN VIBRATION DAMPER

10. SET NO. 1 CYLINDER TO TDC/COMPRESSION

11. INSTALL CHAIN SUB-ASSEMBLY

12. CHECK NO. 1 CYLINDER TO TDC/COMPRESSION

13. INSTALL NO. 2 CHAIN VIBRATION DAMPER

14. INSTALL CHAIN TENSIONER SLIPPER

15. INSTALL TIMING CHAIN COVER OIL SEAL

16. INSTALL TIMING CHAIN COVER SUB-ASSEMBLY

17. INSTALL CRANKSHAFT PULLEY

18. INSTALL NO. 1 CHAIN TENSIONER ASSEMBLY

19. INSTALL SPARK PLUG TUBE GASKET

20. INSTALL CYLINDER HEAD COVER GASKET

21. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY

22. INSTALL IGNITION COIL ASSEMBLY

23. INSTALL FUEL INJECTOR ASSEMBLY

24. INSTALL NO. 1 DELIVERY PIPE SPACER

25. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY

26. INSTALL FUEL VAPOR FEED PIPE

27. INSTALL INTAKE MANIFOLD

28. INSTALL NO. 1 WATER BY-PASS PIPE (w/o EGR System)

29. INSTALL EGR COOLER SUB-ASSEMBLY (w/ EGR System)

30. INSTALL EGR VALVE ASSEMBLY (w/ EGR System)

31. INSTALL EGR PIPE ASSEMBLY (w/ EGR System)

32. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

33. INSTALL THROTTLE BODY ASSEMBLY

34. INSTALL ENGINE HANGERS

35. REMOVE ENGINE FROM ENGINE STAND

36. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE