CAMSHAFT > INSTALLATION

1. INSTALL NO. 1 CAMSHAFT BEARING

2. INSTALL NO. 2 CAMSHAFT BEARING

3. INSTALL NO. 2 CAMSHAFT

4. INSTALL CAMSHAFT

5. INSTALL BEARING CAP

6. INSTALL CAMSHAFT HOUSING SUB-ASSEMBLY

7. INSTALL CAMSHAFT TIMING SPROCKET

8. INSTALL CAMSHAFT TIMING GEAR ASSEMBLY

9. INSTALL NO. 1 CHAIN VIBRATION DAMPER

10. SET NO. 1 CYLINDER TO TDC/COMPRESSION

11. INSTALL CHAIN SUB-ASSEMBLY

12. CHECK NO. 1 CYLINDER TO TDC/COMPRESSION

13. INSTALL NO. 2 CHAIN VIBRATION DAMPER

14. INSTALL CHAIN TENSIONER SLIPPER

15. INSTALL TIMING CHAIN COVER OIL SEAL

16. INSTALL TIMING CHAIN COVER SUB-ASSEMBLY

17. INSTALL CRANKSHAFT PULLEY

18. INSTALL NO. 1 CHAIN TENSIONER ASSEMBLY

19. INSTALL SPARK PLUG TUBE GASKET

20. INSTALL CYLINDER HEAD COVER GASKET

21. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY

22. INSTALL IGNITION COIL ASSEMBLY

23. INSTALL FUEL INJECTOR ASSEMBLY

24. INSTALL NO. 1 DELIVERY PIPE SPACER

25. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY

26. INSTALL FUEL VAPOR FEED PIPE

27. INSTALL INTAKE MANIFOLD

28. INSTALL EGR WITH COOLER PIPE SUB-ASSEMBLY

29. INSTALL EGR VALVE ASSEMBLY

30. INSTALL EGR PIPE ASSEMBLY

31. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

32. INSTALL THROTTLE BODY ASSEMBLY

33. INSTALL ENGINE HANGERS

34. REMOVE ENGINE ON ENGINE STAND

35. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE