ELECTRONIC SHIFT LEVER SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

1. VEHICLE BROUGHT TO WORKSHOP

2. CUSTOMER PROBLEM ANALYSIS

3. CONNECT INTELLIGENT TESTER TO THE DLC3*

4. CHECK DTC AND SAVE FREEZE FRAME DATA* ,

5. CLEAR DTC AND FREEZE FRAME DATA*

6. CONDUCT VISUAL INSPECTION

7. CONFIRM PROBLEM SYMPTOMS

8. DUPLICATE CONDITIONS THAT PRODUCE SYMPTOMS

9. CHECK FOR DTCS*

10. REFER TO DTC CHART

11. CONDUCT BASIC INSPECTION

12. CHECK ECU POWER SOURCE CIRCUIT

13. CONDUCT CIRCUIT INSPECTION

14. CHECK FOR INTERMITTENT PROBLEMS

15. CONDUCT PARTS INSPECTION

16. IDENTIFY PROBLEM

17. ADJUST AND/OR REPAIR

18. CONDUCT CONFIRMATION TEST