REAR AXLE HUB BOLT > REPLACEMENT

1. PRECAUTION

2. REMOVE REAR NO. 2 FLOOR BOARD

3. REMOVE REAR DECK FLOOR BOX

4. REMOVE REAR NO. 3 FLOOR BOARD

5. DISABLE BRAKE CONTROL

6. REMOVE REAR WHEEL

7. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)

8. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)

9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for LHD)

10. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

11. LOOSEN PARKING BRAKE CABLE

12. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY

13. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY

14. REMOVE REAR DISC

15. REMOVE REAR AXLE HUB BOLT

16. INSTALL REAR AXLE HUB BOLT

17. INSTALL REAR DISC

18. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY

19. CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY

20. ADJUST PARKING BRAKE

21. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for LHD)

22. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)

23. INSTALL FRONT DOOR SCUFF PLATE LH (for LHD)

24. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

25. INSTALL REAR WHEEL

26. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

27. INSTALL REAR NO. 3 FLOOR BOARD

28. INSTALL REAR DECK FLOOR BOX

29. INSTALL REAR NO. 2 FLOOR BOARD