DTC    U0110-159    Lost Communication with Driver Motor Control Module

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK FUSE (PCU)

CLEAR DTC

CHECK DTC OUTPUT (HV)

CHECK INVERTER WITH CONVERTER ASSEMBLY (GENERATOR CABLE CONNECTION CONDITION)

CHECK INVERTER WITH CONVERTER ASSEMBLY (MOTOR CABLE CONNECTION CONDITION)

CHECK HYBRID VEHICLE TRANSAXLE ASSEMBLY (MG1)

CHECK HYBRID VEHICLE TRANSAXLE ASSEMBLY (MG2)

CHECK HARNESS AND CONNECTOR (INVERTER WITH CONVERTER ASSEMBLY POWER SOURCE CIRCUIT)

CHECK POWER MANAGEMENT CONTROL ECU (CHECK WAVEFORM)

CHECK POWER MANAGEMENT CONTROL ECU (CHECK WAVEFORM)

CHECK POWER MANAGEMENT CONTROL ECU (CHECK WAVEFORM)

CHECK HARNESS AND CONNECTOR (POWER MANAGEMENT CONTROL ECU - INVERTER WITH CONVERTER)

CHECK INVERTER WITH CONVERTER ASSEMBLY

CHECK HARNESS AND CONNECTOR (POWER MANAGEMENT CONTROL ECU - INVERTER WITH CONVERTER)

CHECK INVERTER WITH CONVERTER ASSEMBLY

CHECK HARNESS AND CONNECTOR (POWER MANAGEMENT CONTROL ECU - INVERTER WITH CONVERTER)

CHECK POWER MANAGEMENT CONTROL ECU

REPLACE FUSE (PCU)

CHECK HARNESS AND CONNECTOR (INVERTER WITH CONVERTER ASSEMBLY - PCU FUSE)

REPLACE INVERTER WITH CONVERTER ASSEMBLY

REPAIR OR REPLACE HARNESS OR CONNECTOR

CHECK HYBRID VEHICLE TRANSAXLE ASSEMBLY (GENERATOR CABLE CONNECTION CONDITION)

CHECK GENERATOR CABLE

CHECK HYBRID VEHICLE TRANSAXLE ASSEMBLY (MOTOR CABLE CONNECTION CONDITION)

CHECK MOTOR CABLE